Cordless by design
Slide in the rechargeable 37 Wh battery for untethered inflation around the vehicle.
Dual-power roadside inflator
Replace the rechargeable battery with the included 12V vehicle-power adapter and continue inflating directly from your car.
No charge today. Get product and launch updates by email.
Cordless power, same-slot 12V backup and a complete roadside kit - all in one compact system.
Go cordless
Use the removable 37 Wh battery.
Swap the power module
Slide the 12V adapter into the same slot.
Plug into the vehicle
Continue from the cigarette-lighter outlet.
One mounting slot. Two ways to power it.
There is no automatic switch. When the battery is depleted, remove it and install the included 12V adapter in its place.
Slide in the rechargeable 37 Wh battery for untethered inflation around the vehicle.
Remove the battery, slide in the adapter, and power the compressor directly from the vehicle.
A deliberate manual swap
The two power modules are interchangeable - not automatic. The same mounting slot accepts either one.
Release the rechargeable power module from the inflator.
Install it in the exact same mounting slot.
Connect the cigarette-lighter cable and continue inflating directly from the car.
Fewer roadside frustrations
From the valve connection to the way the cables pack away, Relay 37 is designed as one complete inflation system.
Clamp onto the valve with a lever instead of repeatedly threading a connector in the dark.
The included battery-slot adapter has an approximately 10-foot fused cigarette-lighter cable.
The integrated LED work light includes a fast-flash mode for roadside visibility.
The hose, power modules, adapters and spare fuse store in a compact protective carrying case.
Lock on. Stay connected.
A locking lever chuck clamps onto the valve stem quickly and stays put while you move to the controls.
Set it. See it. Save it.
The dual digital display keeps your preset target and the tire’s current pressure visible at the same time, so you can track every fill at a glance.
Choose the pressure you want before inflation begins.
A second readout shows the tire’s current pressure as it fills.
Preset-pressure control stops inflation when the selected pressure is reached.
Pressure memory makes repeat inflation faster and more familiar.
Compact size. Serious capability.
A 25 mm cylinder, broad pressure range and four selectable pressure units give Relay 37 the versatility to move from vehicle tires to bikes, sports gear and inflatables. Its 175 x 70 x 240 mm body weighs just 0.75 kg.
*Estimated using 195/65 R15 tires. Inflation time and quantity vary with starting pressure, tire size, temperature and battery charge.
A more complete configuration
One case. Everything in its place.
Recharge the removable battery with the included USB-C cable*.
One system, more than one ride
Designed for personal-use tires and inflatables. Not intended for commercial truck tires.
Good questions, straight answers
Remove the depleted battery, slide the included 12V vehicle-power adapter into the same slot, and plug its cigarette-lighter cable into the vehicle to continue inflating directly from the car.
No. The power source is changed manually: remove the battery, install the 12V adapter in the same slot, then plug the cable into the vehicle outlet.
The dual digital display shows your preset target pressure and the tire’s current pressure at the same time. Preset-pressure control stops at the target*, while pressure memory helps you return to a preferred setting for repeat use*.
Relay 37 supports 3-160 PSI, or 0.2-11 bar, with PSI, BAR, kPa and kg/cm² selectable on the display.
Testing estimates around four minutes for a 195/65 R15 tire and around four comparable tires per battery charge*. Actual results vary with starting pressure, tire size, temperature and battery charge.
Relay 37 is expected to launch at $64.99. Send a launch-notification request and we’ll let you know when ordering opens.
Remove the battery and recharge it using the included USB-C cable*. Charging time depends on the power source used.
Use it for passenger cars, SUVs, motorcycles, bicycles, sports equipment and common inflatables. It is not intended for commercial truck tires.
Like any compact compressor, Relay 37 should be allowed to cool between extended inflation jobs*. Follow the included manual for operating and cooldown guidance.
Relay 37 is coming soon. Send a launch-notification request and we’ll contact you when ordering opens.
*Asterisked performance and convenience features can vary with tire size, starting pressure, temperature, battery charge, power source and setup.
Be first to know
Request an email when Relay 37 is ready to order.